top of page

Dear Valued Customer,

 

We ask that you read the instruction manual thoroughly before using your new Sno-Block® or Spinner-Block® Ice Machine.

 

The Sno-Block® and Spinner Block® machines have copyrights and are registered trademarks. There is only one Sno-Block® and Spinner-Block® designed and developed by Larry N. Buras, and is marketed by Delta Ice, Air, & Heat, Incorporated.

 

The Sno-Block® Ice Machines were designed for the New Orleans style shavers with the square blocks of ice and the Spinner-Block® Ice Machines were designed for the Hatsuyuki®, Swan®, and the Fugimarca® Japanese style shavers, with the round cylinder ice; however, they can be used in other applications including fishing charter businesses or ice houses.

OUR PRODUCTS

About the Sno-Block

The Sno-Block machine produces block ice in the exact dimensions required for use in the New Orleans style shavers and it does so at a cost of around 1 penny a pound. The ice produced is excellent for Snow-Balls, softer than commercial ice and extends the life of your shaver blades between sharpening.

 

At the beginning and end of the Snow-Ball season, when full harvest of ice is not needed, you may take from the machine only the ice you need. The remaining ice will be stored at the proper temperature. The Termostat will regulate the compressor and your electric bill will be reduced accordingly.

 

The Sno-Block cabinet is constructed of durable gel-coated fiberglass with foamed-in-place insulation. The warranty covers one year on all parts and the compressor.

 

The 304 stainless steel sanitary ice cans measure approximately 5.5" x 5.5" x 16" and each block of ice they produce weighs between 12 and 14 pounds. Plastic polyurethane cans are also available.

SNO-BLOCKS

Model 404-220-SB

41” high x 42 3/8” long x 27.5” wide, refrigeration unit can be top mounted to save even more space.  Uses 15 gallons of propylene glycol and makes 9 blocks of ice twice a day, that’s approximately 220 lbs of ice.  Comes ready to plug in and run.  Shipping weight is 415 lbs crated.

Model 404-440-SB

Like the 220-SB, this machine comes ready to plug in and run, makes 20 blocks of ice twice a day, that’s approximately 480 lbs of ice.  Dimensions are 41” High x 72.5” long. Uses 30 gallons of glycol. Shipping weight is 715 lbs with crating.

Model 404-1000-SB

Model 404-1200-SB

The best machine for the medium sized market is the 404-1000-SB. It generates 40 blocks of ice every 12 hours (approximately 1000 lbs of ice a day). All Sno-Block® cabinets are made of durable gel coated fiberglass and are insulated against the input of heat. Dimensions are: 41” high x 72 ½” long. It is shipped ready to plug in and run with 40 gallons of glycol.  The shipping weight is 1015 lbs with glycol. The 404-1000-SB has a 2hp compressor and the 404-1200-SB has a 2.5hp compressor, thus harvesting ice every 10 hrs.

Model 404-1500-SB

This is the real work-horse of the industry.  The 1500-SB Sno-Block® produces approximately 1500lbs of ice per 24 hour period utilizing the 40 ice cans included.  Shipped with both refrigeration units separate, some installation by a refrigeration technician will be needed.  Otherwise, the machine arrives ready to go. The machine uses 40 gallons of glycol and with the exception of the two remoted refrigeration units has the same height of 41” and cabinet length of 49.5”. The refrigeration units are 19 ½” x 36” x 18 ½” each.  Shipping weight crated with glycol 1165 lbs.

Please call or email
Tracy@sno-block-ice.com for info or orders

About the Spinner-Block

The Spinner-Block was designed to make the 8lb-cyclinders of Ice for the Swann or Hatsuyuki Shavers. Each machine makes ice every approximately every 8 hours at 70 degrees, ambient temperature. We have 8-block, 14-block and 19-block models to fit every need. The cabinet is constructed of durable gel-coated fiberglass, which is the same material used to make boats. Each machine has a top-mounted T-Stat for better temperature control and uses Ozone friendly refrigerant. All machines have an electrical whip and door gasket installed.

SPINNER-BLOCKS

Model 404-08-SPB

Produces 8 cylinders of ice per harvest approximately every 8 hours – 24 blocks (192lbs) a day @ 70º air and 60º water temperature.  Ice cylinder is 7” in diameter and 6” high.  Each block weighs approximately 8 lbs.  Comes complete and ready to plug in and run.  Shipped with 20 gallons of propylene glycol.  Unit dimensions:  54.5” wide x 35” high x 34” deep. Shipping weight is

435 lbs with machine and glycol.

 

Model 404-14-SPB

Produces 14 cylinders of ice per harvest approximately every 8 hours, that’s 42 block (336lbs) a day @ 70º air and 60º water temperature.  Ice cylinder is 7” in diameter and 6” high. Each block weighs 8lbs and that makes for 336 lbs of ice per day.  Comes ready to plug in and run along with 35 gallons of glycol. Unit dimensions:  77.5” wide x 35” high x 34” deep. The machine and glycol is 695 lbs shipping weight.

Model 404-19-SPB

Produces 19 cylinders of ice per harvest approximately every 10 hours @ 70º air and 60º water temperature.  Ice cylinder is 7” in diameter and 6” high.  Each block weighs 8lbs, that’s 365 lbs of ice per day.  Shipped with 45 gallons of glycol and comes ready to plug in and run.  Unit dimensions:  77.5” wide x 35” high x 42” deep. Machine weight and glycol shipping is 905 lbs.

Model 404-114-SPB

Produces 19 cylinders of ice per harvest approximately every 7 hours @ 70º air and 60º water temperature. Ice cylinder is 7” in diameter and 6” high. Each block weighs approximately 8lbs. Machine comes with 2 refrigeration units and will require set up by a technician.  It  is shipped with 45 gallons of glycol. Unit dimensions: 55” wide x 35” high x 42” deep. Each condenser unit is 20” in length. Machine shipping weight and glycol is 1050 lbs.

 

Please call or email
Tracy@sno-block-ice.com for info or orders

bottom of page